To initiate voice control, say "Hi Zeekr".
You can use voice command to:
|
• |
Control media and radio. Say for example "Play radio" or "Pause music". |
|
• |
Control climate settings. Say for example: "Set temperature to 16 degrees" or "Turn on seat heating". |
|
• |
Use your connected phone. Say for example: "Call Emma" or "Call back". |
|
• |
Control the car. Say for example: "Open the window" or "Enable seat massage". |
|
• |
Control navigation. Say for example: "Start navigation" or "Navigate to Baker Street". |
|
• |
Control settings. Say for example "Turn on Bluetooth" or "Mute". |
The following commands does not require the use of "Hi Zeekr":
|
• |
Answer/Decline the call |
|
• |
Play/Pause/Resume music |
The commands listed are not all available commands. For example, "Open the window" is in the list, but you could also say "open the driver window halfway ". If there is a button or a setting that performs a certain action, you can usually use a voice command to do the same thing.
Follow this structure to make sure the voice control assistant understands and executes the task correctly:
|
1. |
Action: What you want to do (for example: Turn on, increase, set).
|
|
2. |
Target: What you want to affect (for example: Wi-Fi, volume, brightness).
|
|
3. |
Modifier or value: Any additional detail to specify the action (for example: to 20 percent, to level five, to maximum).
|
Examples: "Turn on the Wi-Fi", "Increase the volume to 20%".